: Depress the thumb safety to unlock the slide, then pull the slide rearward until it is fully cocked.
Pull the slide fully rearward to reveal a flat spring steel clip (sometimes called a "keeper") located under the rear of the slide. Use needle-nose pliers or a hooked tool to pull this clip straight up and out. marksman repeater disassembly
: When the pistol is open, check the piston seals for wear. If you have an older model with a leather seal, ensure it is soft and pliable; if dry, add a small amount of non-detergent silicone oil. : Depress the thumb safety to unlock the
Disassembling the Marksman Repeater Go to product viewer dialog for this item. : When the pistol is open, check the piston seals for wear
The frame is die-cast Zamak. This material is brittle and susceptible to "zinc pest" (corrosion/rotting) if stored in humid conditions. When reassembling, screws must be torqued gently—just enough to seat the part. Over-torquing will shear the internal casting threads instantly.