Insinkerator Garbage Disposal Jammed -

Before you restore power, let’s make sure the blades spin freely and clean the grinders at the same time.

This is the official InSinkErator fix. Almost every unit comes with a small, L-shaped tool called a (often stored under the sink or taped to the disposal). If you lost yours, a standard 1/4-inch Allen wrench usually works. insinkerator garbage disposal jammed

If the disposal is humming but not spinning, turn it . Letting it hum while jammed can burn out the motor. Before you restore power, let’s make sure the

Even if the unit is off, the blades are sharp, and accidents happen. We will be using tools, not fingers. If you lost yours, a standard 1/4-inch Allen

If the wrench won't budge or the unit is leaking from the bottom, it might be time for a replacement. But hopefully, you just saved yourself a service call! 🛠️

Move the wrench in both directions. It might be stiff at first, but keep working it until you can make a full 360-degree revolution. The wrench is designed to bend slightly before the disposal breaks, so don't be afraid to use a bit of force if needed. Jam-Buster Wrench: Garbage Disposal Wrench - InSinkErator

Look under your sink at the very bottom center of the disposal. You will see a small, hex-shaped hole.