Change - Fiat 500x Oil

13mm socket for the drain plug; 10mm socket for the undertray bolts; 27mm or 32mm socket (depending on engine) for the oil filter cap.

Yet, the Fiat 500X is not without its quirks. The DIY changer must be aware of two common pitfalls. First, the oil filter housing on the MultiAir engine is often a plastic canister located on the top or side of the engine. It requires careful handling; over-torquing the cap can crack it, leading to a slow leak. Second, resetting the oil life monitor is not always intuitive. It involves turning the ignition to "RUN" without starting the engine, fully pressing the gas pedal three times within ten seconds, and then cycling the power. Skipping this step leaves the car thinking it is still overdue for service, which can cause persistent warning chimes. fiat 500x oil change

Wait a minute for the oil to settle into the pan. Pull the dipstick, wipe it clean, reinsert it, and pull it again. The level should be between the two holes/dimples on the stick. 13mm socket for the drain plug; 10mm socket